Brother PR-600 - Using the Embroidery Sheet

OTHER BASIC PROCEDURES —————————————————————————————————————————————————
—
66
Using the embroidery sheet
In order to hoop the fabric so that the pattern will be
sewn in the correct position, use the guidelines on
the embroidery sheet to accurately stretch the fabric
in the frame.
1
With a fabric marker, mark the area of the
fabric you want to embroider.
2
Place the embroidery sheet on the inner
frame. Align the guidelines on the embroidery
sheet with the marks that you drew on the
fabric.
1 Guidelines
2 Inner frame
3
Gently stretch the fabric, so that there are no
folds or wrinkles.
4
Remove the embroidery sheet.
Sapphire.book Page 66 Friday, August 1, 2003 9:12 AM