Brother PT-1900 User Manual

IV - 12
4.2 ERROR MESSAGE
4.2.1 Error Message List
The error message list is shown as follows.
Error Conditions Display
U.K./BELGIUM FRENCH GERMAN U.S.A./
AUSTRALIA
CANADA
When the power is ON
(CODE+K):
Check system finds any
problem in the ROM.
(checksum for all ROM
data)
ROM
PROBLEM!
PROBLEME
ROM!
ROM -
FEHLER!
ROM
PROBLEM!
PROBLÈME
ROM!
When the power is ON
(CODE+K):
The same kind of two or
more solder points is ON,
or the solder point is not
correct.
SOLDER X SOLDER X SOLDER X SOLDER X SOLDER X
When the power is ON:
The wrong adapter which
supplies higher voltage is
used.
<Supplement>
When the message is
disappeared, the system
is turned OFF after
approx. two seconds.
WRONG
ADAPTER!
CHANGER
ADAPTATEUR
FALSCHER
ADAPTER!
CHANGE
ADAPTOR!
CHANGER
ADAPTATEUR
While printing:
The batteries are weak.
(The message is
displayed after printing.)
<Supplement>
After the message is
disappeared, the machine
returns to the text input
mode.
BATTERIES
WEAK!
PILES
USEES!
BATTERIEN
SCHWACH!
BATTERIES
WEAK!
PILES
USÉES!
While feeding the tape:
The batteries are weak.
(The message is
displayed after feeding.)
<Supplement>
After the message is
disappeared, the machine
returns to the text input
mode.

Brother PT-1900 Specifications

General

Brand	Brother
Model	PT-1900
Category	Label Maker
Language	English