Canon iR2520 User Manual

Service Call Message
6-13
Troubleshooting
6
Troubleshooting
Using the Machine with Limited Functions
If the Service Call Message screen appears indicating a malfunction of the optional
finisher, you can clear the screen by setting the machine to the Limited Functions
Mode. In this mode, you can continue operating the machine by disabling the
finisher functions.
IMPORTANT
If the main power is turned OFF, all the jobs in the machine’s memory will be erased.
NOTE
• Setting the machine to the Limited Functions Mode from the Service Call Message
screen enables the Limited Functions Mode in Common Settings. (See “Configuring
the Machine’s Basic Settings” in the e-Manual.)
• The Service Call Message screen may re-appear if the Limited Functions Mode is
deactivated without isolating the cause of the malfunction.
3 Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
1 Press [Limited Fnctns Mode].
NOTE
If you want to turn OFF the machine,
press [Shutdown].
2 Press [Yes ].
To quit, press [No].

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds