Canon iR2520 User Manual

Scanning from a Computer (Remote Scan)
4-12
Using the Basic Functions
4
Scanning from a Computer (Remote Scan)
This section describes the basic operation procedure for scanning originals to load
the scanned images to a computer.
IMPORTANT
• If you want to use the machine as a network scanner, it must be connected to a
computer over an IPv4 network.
• The screen shots shown in this section may differ from the ones displayed on your
computer, depending on the application or operating system you are using.
Switch the Machine Online Place Your Originals
Press (SCAN/PRINT) to display
the Scan/Print screen ➞ [Remote Scan]
➞ [Online].
Place your originals in the feeder or on
the platen glass.
• Close the feeder/platen cover after placing
your originals on the platen glass.
• If the machine is in the Sleep mode, press
(Power).
•
Enter your ID and password or insert the control
card if the screen prompts you to do so. (See
“How to Log in to the Machine,” on p. 4-2.)
1 2

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds