Canon iR2520 User Manual

Service Call Message
6-14
Troubleshooting
6
Requesting Repairs from the Control Panel
If you notice an abnormality with the machine, you can send a repair request from
the touch panel display.
WARNING
Do not connect or disconnect the power cord with wet hands, as this may result
in electrical shock.
CAUTION
Always grasp the power plug portion when disconnecting the power cord.
Pulling on the cord may expose or snap the core wire or otherwise damage the
power cord. If the power cord is damaged, this could cause current to leak,
resulting in a fire or electrical shock.
IMPORTANT
To make repair requests from the touch panel display, the machine must be configured
beforehand. For more information, contact your local authorized Canon dealer.
The machine starts up in the Limited
Functions Mode.
NOTE
After the problem with the finisher is
solved, disable the Limited Functions
Mode from the Additional Functions
menu. (See “Configuring the
Machine’s Basic Settings” in the
e-Manual.)
1 Press (Counter Check) on the
control panel.

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds