Installation Location and Handling
1-5
Machine Installation
1
Other Precautions
■ Electrical noise may cause this machine to malfunction or los e data.
■ Make sure that the power supply for the machine is safe, and has a steady
voltage.
■ Do not connect other electrical equipment to the same power outlet to
which the machine is connected.
■ Do not connect the power cord to a multiplug power strip, as this may
cause a fire or electrical shock.
■ Do not connect the machine to an uninterruptible power source.
■ If plugging this machine into an AC power outlet, do not use the remaining
sockets to connect other devices.
■ Do not connect the power cord into the auxiliary outlet on a computer.
■ The power cord may become damaged if it
is often stepped on or if heavy objects are
placed on it. Continued use of a damaged
power cord can lead to an accident, such
as a fire or electrical shock.
■ The power cord should not be taut, a
s this
may lead to a loose connection and cause
overheating, which could result in a fire.
■ If excessive stress is applied to the connection part of the power cord, it
may damage the power cord or the wires inside the machine may
disconnect. This could result in a fire. Avoid the following situations:
- Connecting and disconnecting the power cord frequently
- Tripping over the power cord
-Bending the power cord near the connection part, and applying
continuous stress to the power outlet or the connection part
- Applying excessive force on the power plug
To Next Page
Loading...
Need help?
General
