Canon iR2520 User Manual

Turning ON/OFF the Machine
2-3
Before You Start Using the Machine
2
NOTE
• If the machine is managed with department IDs or user IDs, the log-in screen appears.
In this case, enter your department ID or user ID (and password). (See “Basic
Operations” in the e-Manual.)
• You can select the top screen of the desired function that appears when the machine
is turned ON. (See “Configuring the Machine’s Basic Settings” in the e-Manual.)
When the Machine Is Turned ON for the First Time
When the machine is turned ON for the first time, the initial setup screens (Setup
Guide) appear on the touch panel display, navigating you to perform the following
basic setup items:
• Language and country/region
• Mixing the toner
• Date & Time Settings
• Fax settings (unit telephone number, unit name, and telephone line type)
• IP address settings
• Remote UI Access Password
Follow the procedure below to quickly set the machine configuration and use its
basic functions immediately.
3 Wait until the machine is ready to
scan.
The screen on the left is displayed until the
machine is ready to scan.
The screen on the left is displayed when the
machine is ready to scan.

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds