Canon iR2520 User Manual

Turning ON/OFF the Machine
2-11
Before You Start Using the Machine
2
NOTE
After restarting the machine, you might want to check if the IP address is correctly set
to the machine. For help, see “Connecting the Machine to a TCP/IP Network” in the
e-Manual.
Using the Control Panel Power Switch (Sleep Mode)
8 Press [OK] to finish the initial
setup.
From the next time the machine’s main
power is turned ON, the Setup Guide does
not appear.
If you want to return to the previous screen,
press [Back].
9 Press [Yes ] to restart the
machine.
If the IP address settings have been
specified, restart the machine to make the
settings effective. Press [No] if you want to
manually restart the machine later. (See
“Restarting the Machine,” on p. 6-12.)
To turn the control panel ON or OFF, press
the control panel power switch. When the
control panel is turned OFF, the machine is
in the Sleep mode.
NOTE
• The machine will not enter the Sleep mode
when it is in operation.
• The machine can receive, forward, or print
documents when it is in the Sleep mode.
Control Panel Power Switch Machine Status
ON Ready
OFF Sleep mode

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds