Canon iR2520 User Manual

Cable Connection
1-9
Machine Installation
1
Cable Connection
This section describes how to connect the machine to a computer or network.
If you want to use the machine as a local printer, you can connect the machine
directly to a computer with a USB cable. If the machine is shared by a group of
network users, a 10BASE-T/100BASE-TX LAN cable is required.
IMPORTANT
A USB cable or a network cable is not included in this package. Please obtain a
suitable cable for your computer or network.
Using the Machine as a Local Printer (USB Connection)
If you want to use the machine as a local printer, you can connect the machine and
a computer using a USB cable. The machine is USB 2.0 high-speed* compatible.
After establishing the connection between the machine and the computer, you must
install the drivers and utilities that match the operating system on your computer.
For more information on installing the driver through USB connection, see the
Printer Driver Installation Guide or Mac Printer Driver Installation Guide. For more
information on the utility software, see Chapter 3, “Accompanying CD-ROMs.”
* This depends on the specifications of the operating system on your computer.
UFRII LT User Software CD-ROM
USB Cable
USB Port
The USB port (type B) is located
on the left side of the machine.

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds