Canon iR2520 User Manual

Making a Copy
4-2
Using the Basic Functions
4
This section describes the basic operation procedure for copying originals.
Display the Copy Screen Place Your Originals
Press (COPY) to display the top
screen of the Copy function.
Place your originals in the feeder or on
the platen glass.
• If the machine is in the Sleep mode, press
(Power).
• Close the feeder/platen cover after placing
your originals on the platen glass.
• Enter your department ID and password if the screen prompts you to do so ➞ press (Log In/Out).
• Enter your user ID and password if the screen prompts you to do so ➞ press (Log In/Out).
• Insert the control card if the screen prompts you to do so.
• When you have finished the operations, press (Log In/Out) or remove the control card to log out.
For more information, see “Basic Operations” in the e-Manual.
1 2
Making a Copy
How to Log in to the Machine

Canon iR2520 Specifications

General

Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Duplex Printing	Yes
Connectivity	USB 2.0
Type	Laser
Warm-up Time	30 seconds or less
Paper Input	250 sheets
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Copy Speed	20 ppm (A4)
Zoom	25-400%
Scan Resolution	600 x 600 dpi
Scan Destinations	Email
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Fax Speed	33.6 kbps
Interface	USB 2.0
Operating System Compatibility	Windows, Mac
First Print Time	Less than 10 seconds