Canon LBP252dw User Manual

Make Direct Connection (Access Point Mode)
0W20-02H
Even in an environment without wireless LAN router, you can connect your mobile device and the machine without
going through dicult settings when you use "Access Point Mode," which allows you to wirelessly and directly connect
your mobile device to the machine.
Using the Machine in Direct Connection (in Access Point Mode)
Follow these steps to establish a connection using Access Point Mode.
Put the machine into Access Point Mode.
● Set <Enable Direct Connection> to <On>.
Enable Direct Connection(P. 292)
Put the machine into a connection waiting state.
● Press use / to select <Enable Direct Connection> press . The
machine enters the state in which you can connect your mobile device to the machine.
Connecting from a mobile device
● Based on the SSID and network key displayed in the display, make wireless LAN
connection settings for connecting to the machine.
● The screen below appears in the display during the connection process.
<Disconnect>
Can Be Used Conveniently with a Mobile Device
125

Canon LBP252dw Specifications

General

Printer Type	Laser
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	Up to 50, 000 pages
Recommended Monthly Print Volume	750 to 3, 000 pages
Media Types	Plain paper, Heavy paper, Transparency, Label, Envelope
Memory	512 MB
Operating Systems Compatibility	Windows, Mac OS, Linux
Print Speed	30 ppm
Paper Capacity	250 sheets
Warm-up Time	16 seconds
First Print Out Time	6 seconds
Paper Input	250-sheet cassette
Paper Output	100 sheets
Media Sizes	A4, A5, B5, Legal, Letter, Executive, Envelope
Media Weights	60 to 163 g/m²
Interface Type	USB, Ethernet, Wireless
Control Panel	5 Line LCD
Dimensions	400 x 377 x 298 mm
Print Margins	5 mm-top, bottom, left and right