Daylight Saving Time Settings
*1
Enable or disable daylight saving time. If daylight saving time is enabled, specify the dates from which and to
which daylight saving time is in effect.
Off
On
Start: Month, Week, Day
End: Month, Week, Day
<Timer Settings> <Date/Time Settings> <Daylight Saving Time
Settings> Select a month and day
Auto Reset Time
If a key is not pressed for a specied period of time, the screen and the settings are initialized to display the default
screen (Auto Reset). Specify the interval at which the Auto Reset is performed. Select <0> to disable the Auto Reset
function. The Auto Reset is not performed in the following cases:
● The setting menu is displayed.
● The machine is processing data, such as when printing documents.
● An error message is displayed and the Error indicator is blinking (However, Auto Reset is performed when the error
does not prevent the user from continuing to use a function.)
0 (Auto Reset is disabled.)
1 to 2 to 9 (min.)
<Timer Settings> <Auto Reset Time> Set the Auto Reset time
Auto Sleep Time
If the machine has not been operated or has had no data to print for a specied period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power. Entering Sleep Mode(P. 62)
3 to 60 (min.)
Auto Shutdown Time
Set a timer to automatically shut down the machine after the specied period of idle time has elapsed since the
machine entered the sleep mode. Setting Auto Shutdown Time(P. 66)
Setting Menu List
309