Replacing Ink Tanks
When remaining ink cautions or errors occur, the message will appear on the touch screen to inform you of
the error. In this state, the printer cannot print or scan. Take appropriate action according to the message.
When Error Occurred
Note
• For precautionary notes on handling ink tanks, see Notes on ink tanks.•
Replacing Procedure
When you need to replace an ink tank, follow the procedure below.
1.
Check that printer is turned on.
1.
2.
Open the scanning unit / cover.
2.
The print head holder moves to the replacement position.
Caution
• Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder•
until it stops completely.
Important
•
Do not touch the metallic parts or other parts inside the printer.
•
3.
Remove the ink tank where the ink runs out.
3.
Push the tab (A) and lift the ink tank to remove.
109
To Next Page
Loading...
Need help?
General