Document Stored in Printer's Memory
If the sending faxes is not complete or the printer was not able to print the received faxes, these faxes are
stored in the printer's memory.
If an error occurred during a fax transmission, the document is not stored in the printer's memory.
In the following cases, the printer is not able to print the received fax and will automatically store the fax in
its memory.
• The amount of remaining ink is insufficient to print a fax.
• Paper has run out.
• A different size of paper from that specified by Page size in Fax paper settings is loaded.
• Do not print is selected for Received documents in Auto print settings under FAX settings.
• You pressed the Stop button to cancel printing of a received fax.
Important
• If you unplug the power cord of the printer, all faxes stored in the printer's memory are deleted.•
For details on how to unplug the power cord, refer to Unplugging the Printer.
You can print or delete the faxes stored in the printer's memory.
• To print a document in the printer's memory:•
Printing Document in Printer's Memory
• To delete a document in the printer's memory:•
Deleting Document in Printer's Memory
Note
• When confirming, printing, or deleting a document stored in the printer's memory, you specify it by its•
transaction number. If you do not know the transaction number for your target document, print the list of
documents (MEMORY LIST) first.
For details on how to print MEMORY LIST, see Printing Document in Printer's Memory.
493
To Next Page
Loading...
Need help?
General