Managing the Printer Power
This function allows you to manage the printer power from the Canon IJ Printer Assistant Tool.
Power Off
The Power Off function turns off the printer. When you use this function, you will not be able to turn the
printer on from the Canon IJ Printer Assistant Tool.
1.
Open Canon IJ Printer Assistant Tool
1.
2.
Perform power off
2.
Click Power Off. When the confirmation message appears, click OK.
The printer power switches off.
Important
• You cannot receive faxes when the printer is switched off.
Auto Power
Auto Power allows you to set Auto Power On and Auto Power Off.
The Auto Power On function automatically turns on the printer when data is received.
The Auto Power Off function automatically turns off the printer when there are no operations from the
printer driver or the printer for a specified period of time.
1. Open the Canon IJ Printer Assistant Tool1.
2. Check that the printer is on and then click Auto Power2.
The Auto Power Settings dialog box will open.
Note
•
If the printer is off or if communication between the printer and the computer is disabled, an
error message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
3.
If necessary, complete the following settings:
3.
Auto Power On
Select the auto-power on setting.
Select Disable to prevent the auto-power on feature from functioning.
Check that the printer is on, and then click OK to change the printer settings.
Select Enable to turn the printer on automatically when print data is sent to it.
189
To Next Page
Loading...
Need help?
General