Firmware update
You can update the firmware of the printer, check the firmware version, or perform settings of a notification
screen, a DNS server and a proxy server.
Important
• When you use this function, make sure the printer is connected to the Internet.•
Note
• Only Check current version is available when Enable is selected for Enable/disable Wi-Fi of Wi-Fi in•
LAN settings.
• Install update•
Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
Note
• If the firmware update is not complete, check the following and take an appropriate action.•
Check the network settings such as a wireless router.
If Cannot connect to the server. is displayed on the touch screen, select OK and try again
after a while.
• Check current version•
You can check the current firmware version.
• Update notification settings•
When ON is selected and the firmware update is available, the screen to inform you of the firmware
update is displayed on the touch screen.
• DNS server setup•
Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,
follow the display on the touch screen to perform settings.
• Proxy server setup•
Performs settings for a proxy server. Follow the display on the touch screen to perform settings.
214
To Next Page
Loading...
Need help?
General