Replacing the Maintenance Cartridge
In case of cautions or errors concerning the maintenance cartridge, an error message will appear on the
touch screen to inform you of the error. Take appropriate action as prompted by the message.
When Error Occurred
Important
• If a message is displayed indicating that the maintenance cartridge is nearly full, replace the•
maintenance cartridge as soon as possible. If the maintenance cartridge becomes full, an error
message is displayed and the printer stops working until the cartridge is replaced with a new one.
• Do not touch the terminal (A) of the maintenance cartridge.•
• Do not turn off the printer during replacement of the maintenance cartridge.•
Note
• Use a maintenance cartridge with the model number below.•
Maintenance Cartridge MC-G06 series
1. Prepare a new maintenance cartridge.1.
Remove the maintenance cartridge and the attached plastic bag from the package.
2.
Open the scanning unit / cover (B).
2.
Check the position of the maintenance cartridge (C).
164
To Next Page
Loading...
Need help?
General