Loading Photo Paper / Plain Paper in Rear Tray
You can load plain paper or photo paper.
You can also load envelopes on the rear tray.
Loading Envelopes in Rear Tray
1. Prepare paper.1.
Align the edges of paper. If paper is curled, flatten it.
Note
• Align the edges of paper neatly before loading. Loading paper without aligning the edges may•
cause paper jams.
• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the•
paper becomes completely flat.
For details on how to flatten curled paper, see
Check3
in Paper Is Smudged/Printed Surface Is
Scratched/Ink Blots/Paper Curl.
• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at•
a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.
2.
Open the feed slot cover (A).
2.
3.
Pull straight up and fold back paper support (B).
3.
61
To Next Page
Loading...
Need help?
General