Firmware update
Select this setting item from Printer settings in (Setup).
You can update the firmware of the printer, check the firmware version, or perform settings of a notification
screen, a DNS server and a proxy server.
Important
• When you use this function, make sure the printer is connected to the Internet.•
• Do not turn off the power of a printer while firmware is being updated.•
• Install update•
Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
• Check current version•
You can check the current firmware version.
• Update notification settings•
You can set the printer to display the firmware update information on the touch screen when the
firmware update is available.
When Idle/Power off is selected, the printer informs you of the update during idle and the update
information also appears when you press the ON button.
• Auto update settings•
Select ON to automatically update the firmware to the latest version.
• DNS server setup•
Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup,
follow the display on the touch screen to perform settings.
• Proxy server setup•
Performs settings for a proxy server. Follow the display on the touch screen to perform settings.
195
To Next Page
Loading...
Need help?
General