Feed settings
Select this setting item from (Setup).
Note
• By registering the paper size and the media type, the message can be displayed before printing starts•
when the paper size or the media type of the loaded paper differs from the paper settings.
Paper Settings
• Rear tray paper settings•
Registers the paper size and the media type you load on the rear tray.
• Cassette paper settings•
Registers the paper size you load in the cassette.
• Check paper replacement•
Select ON to automatically detect the paper size when paper is loaded. A screen for confirming the
setting of paper is displayed.
Note
• A screen for confirming the setting of paper is not displayed if you select OFF. Set the size and type•
of paper properly in Rear tray paper settings or Cassette paper settings when making prints.
• For AirPrint of iOS/iPadOS, paper may be printed based on the paper size set during paper loading.•
It is recommended to set to ON when making prints using an AirPrint function.
• Paper settings mismatch (Other)/Paper settings mismatch (Copy)•
If you select Enable, the printer detects whether the paper size and the media type are identical
with those registered in Feed settings. If printing starts with the settings that do not match, an error
message is displayed on the touch screen.
Note
• When Disable is selected, the settings in Feed settings is disabled.•
197
To Next Page
Loading...
Need help?
General