35
Shooting – The Basics
Changing the Image Display Duration
The length of time images are displayed after a
photo has been taken can be changed from
between 3 seconds to 10 seconds or turned off.
1 Press the MENU button.
z The [ (Rec.)] menu appears.
2 Select (Review) using or .
3 Select a Review
setting using or
and press the
MENU button.
z With the [Off] option, the
image will not display.
z With the [3 sec.] to [10 sec.] options, the
image will appear for the time selected even
if you release the shutter button.
z You can continue to display the image as
long as the shutter button is fully held
pressed regardless of the Review setting.
z Another picture can be taken even while the
last is displayed.
Selecting a Shooting Mode
The following modes are available with this
camera.
The settings selected for each mode are kept even
if the shooting mode is changed. When the power
is turned off, the settings are also retained for
certain shooting modes, but not for others (p. 138).
Auto
The camera automatically makes
most of the settings for you.
Manual
You can manually adjust the
exposure, white balance, and
other settings before shooting.
Stitch
Assist
For shooting panorama
composition images
Special
Scene
Select from 8 scene modes to
shoot with the most appropriate
settings for the scene.
Portrait Beach
Night Scene
Fireworks
Foliage Underwater
Snow Indoor
Movie For shooting movies
To Next Page
Loading...
Need help?
General
