EasyManuals Logo

Canon VB-H41 User Manual

Canon VB-H41
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
125
7
Admin Viewer/VB Viewer
Launching the Viewer
Refer to “User Authentication” in “Chapter 4 Top Page
of the Camera” (p. 42) for information on the user
name and password.
The viewer is launched.
Shutting Down the Viewer
Close the web browser in the viewer to shut down.
Connecting from Admin Tools
Only the administrator can connect to this viewer.
(Refer to “Launching the Admin Tools” (p. 82) for
information on launching the Admin Tools.)
Launching the Viewer
Important
The Admin Tools Certificate must be installed on a PC that is
using the Admin Viewer. (p. 26)
This Operation Guide explains relevant operations based on
the IP address “192.168.100.1” (factory default setting). You
must enter the actual IP address set for the camera when
following instructions.
1
Access “http://192.168.100.1/” via the web browser.
2
Click [Admin Viewer] or [VB Viewer] according to the
user.
3
For [Admin Viewer], enter the user name and
password.
1
Launch Admin Tools.
2
Click [Admin Viewer].

Table of Contents

Other manuals for Canon VB-H41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon VB-H41 and is the answer not in the manual?

Canon VB-H41 Specifications

Image Sensor IconImage Sensor
sensor type1/3 inch CMOS
number of pixelsApprox. 2.1 million pixels
scanning systemProgressive
Optics IconOptics
zoom magnification and control20x powered zoom lens with auto focus (12x digital zoom, total 240x zoom)
focal length4.7mm (wide) – 94mm (telephoto)
horizontal field of view60.4° (wide) – 3.2° (telephoto)
lens F-numberF1.6 – F3.5
minimum subject illumination (day mode)0.4 lux (Colour, F1.6 at 1/30 sec, SSC off, 50IRE)
minimum subject illumination (night mode)0.02 lux (Mono, F1.6 at 1/30 sec, SSC off, 50IRE)
focus controlAuto / One-shot AF / Manual / Fixed at infinity
focusing region (day mode)0.3 m – infinity (wide) / 1.0 m – infinity (telephoto)
focusing region (night mode)1.0 m – infinity (wide) / 1.5 m – infinity (telephoto)
shutter speed1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000 and 1/16000sec
Video and Audio IconVideo and Audio
video compression methodH.264, JPEG
video output size (JPEG)1920 x 1080, 960 x 540, 480 x 270, 320 x 240
video output size (H.264)1920 x 1080, 960 x 540, 480 x 270
frame rate (JPEG)30 – 0.1 fps
frame rate (H.264)30/15/10/6/5/3/2/1 fps
audio communicationFull-duplex
audio compression methodG.711 μ-law (64 kbps)
Power IconPower
power sourcesPower over Ethernet (48V DC, Conforms to IEEE 802.3af), 100V – 240V AC, 50/60Hz (via optional AC Adaptor PA-V17), 12V DC or 24V AC (via supplied two-pin connector)
power consumption (PoE)Max. approx. 9.0 W
power consumption (AC adapter PA-V17)Max. approx. 10.6 W
power consumption (DC Input)Max. approx 8.6 W
power consumption (AC Input)Max. approx. 8.8 W
Operating Environment IconOperating Environment
operating temperature-10°C to 50°C
operating humidity5% – 85% RH (without condensation)
Dimensions and Weight IconDimensions and Weight
dimensions (W x H x D)132mm x 155mm x 132mm
weightApprox. 1140 g

Related product manuals