161
Backlight Tab
Figure 3-33
Auto display dimming when using
This parameter is for specifying “Enable” or “Disable” for the backlight auto dimming mode as
well as a time period until when the auto dimming mode starts up. This setting is valid only when
the power source is provided by battery pack.
Turn off backlight when using
The parameters are for specifying “Enable” or “Disable” for backlight auto off as well as a time
period until when the backlight auto off mode starts up.
Note:
If both Backlight Auto Dimming and Backlight Auto Off modes are set effect, one with shorter
time period specified than the other will have the precedence.
Version Tab
This tab displays the information about the Brightness Properties.
Figure 3-34
To Next Page
Loading...
Need help?
General
