280
Customizing in the Registry
Performances of the “Auto Setup” can be automatically customized by changing the parameters in
the following registry.
[HKEY_LOCAL_MACHINE\Drivers\CASIO\UTIL]
Table 5.2
Key Setting Value Description
FLSETUP sz:”1”
Carries out Setup.exe for the FlashDisk at a time of reset on the terminal.
Notes:
• Once the registry is deleted, the applicable application does not automatically start up.
• The registry is initialized to its factory setting by performing a full reset on the terminal.
• Since automatic startup of applications with the utility is performed every time when a reset is
performed on the terminal, it should be avoided by controlling the automatic startup for each
applicable application.
5.3 Welcome Wizard
The Welcome Wizard sets up the following. However, each of the settings can be skipped if not
necessary.
- Configuring the terminal
- Owner information
- Date and time
Notes:
• Setting date and time can be avoided by setting a password even if a full reset takes place on
the terminal.
• Setting date and time must be performed when the RTC is cleared by a full reset on the
terminal.
Customizing Startup Screen
An optional bitmap can be displayed as the Welcome Wizard startup screen. Save an optional
bitmap file as FirstDisp.bmp in the Documents and Settings folder. The screen size of the
file must be set in 240 x 320 dots.
To Next Page
Need help?
General
