35
Quick Start Basics
1. Point the camera at the subject.
If you are shooting with Premium Auto Pro, text will
appear at the bottom of the monitor screen describing the
type of shot the camera has detected.
• You can zoom the image, if you want.
To shoot a snapshot
2. Half-press the shutter button to
focus the image.
When focus is complete, the camera
will beep, the back lamp will light
green, and the focus frame will turn
green.
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for good-
looking images.
Appears when the
camera detects it is
stationary on a tripod.
w Wide Angle z Telephoto
Zoom controller
If the camera decides that it needs to shoot a series of images with Continuous Shutter
(CS), it will display “Š”. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete.
Focus frameBack lamp
Half-press
Press part way.
Beep, beep (Image is in focus.)
To Next Page
Loading...
Need help?
General
