49
Snapshot Tutorial
• The “Focus” setting is always fixed at “AF” (Auto Focus) whenever “Face
Detection” (page 116) is being used. If you want to change the “Focus” setting, first
select “Off” for “Face Detection”.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (Focus) Control Panel option, and
then press [SET].
3. Use [8] and [2] to select the setting you want and then press [SET].
*1
The focus range is the distance from the lens surface.
*2 The focus range depends on the current optical zoom position.
*3 During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for Auto
Focus or focus manually before you press [0] (Movie) to start recording.
Selecting a Focus Mode (Focus)
Settings
REC Screen
Icon Display
Type of Shot
Focus Mode Approximate Focus Range
*
1
Snapshot Movies Snapshot Movies
Q
AF
(Auto
Focus)
None
General
recording
Automatic
Automatic
*
3
1 cm to
9
(infinity)
(0.4" to
9
)
(Wide Angle)
*
2
´
Macro
Close ups
1 cm to 50 cm
(0.4" to 19.7")
(Wide Angle)
*
2
Á
Super
Macro
Close ups
1 cm to 50 cm
(0.4" to 19.7")
W
MF
(Manual
Focus)
When you
want to focus
manually
Manual
1 cm to
9
(infinity)
(0.4" to
9
) (Wide Angle)
*
2
To Next Page
Loading...
Need help?
General
