55
Snapshot Tutorial
When flash is required, the flash unit will pop up automatically when you half-press
the shutter button.
1. In the REC mode, press [2] ( )
once.
2. Use [8] and [2] to select the
flash setting you want and then
press [SET].
3. Half-press the shutter button.
The flash unit will pop up automatically when flash is required.
Using Flash (Flash)
Setting
REC Screen
Icon Display
Description
Auto Flash None
Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to
brighten a subject that normally comes out dark
due to daylight or backlight (daylight synchro
flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can
be used to reduce the chance of redness in the
subject’s eyes.
[2] ( )
Flash
To Next Page
Loading...
Need help?
General
