91
Using BEST SHOT
In addition to optical Anti Shake, a single press of the shutter button while HS Anti
Shake is enabled causes the camera to record multiple images and automatically
combine them. Use this feature to minimize image blur due to camera movement
under conditions where optical anti shake is not possible for some reason.
1. In the BEST SHOT Mode, select “HS Anti Shake” (page 89).
2. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• HS Anti Shake may not operate properly resulting in blurred images if the camera
is moved more than the allowable range or if the subject moves during shooting.
• When shooting with these BEST SHOT scenes, the “ISO” (page 51) and “ISO High
Limit” (page 113) are fixed at “Auto”.
The camera shoots a series of images and then merges them into a final image. The
result is a bright image, even if shot in the dark without a flash.
1. In the BEST SHOT Mode, select “HS Night Shot” (page 89).
2. Press the shutter button to shoot.
• Take care to avoid camera movement and subject movement as you shoot.
• You should be able to see the subject(s) on the monitor screen when
composing the image.
Shooting with High Speed Anti Shake (HS Anti Shake)
Shooting Bright Images in the Dark without Flash
(HS Night Shot)
Shot with “Program Auto”, without flash Shot with “HS Night Shot”
To Next Page
Loading...
Need help?
General
