75
Snapshot Tutorial
NOTE
• Depending on the “ART SHOT” scenes, some of the items on the menu that
appears may not be usable.
• With this “ART SHOT” scene, the flash setting automatically becomes
?
(Flash
Off).
• Movie recording is disabled while “Sparkling Shot” is selected.
• The “Movie Quality” setting can be either “HD” or “STD” only (page 111). When any
“Movie Quality” setting other than “STD” is selected in another mode, the “HD”
setting is used when shooting with ART SHOT.
• When using “HDR Art” for movie recording, the intensity of the art effect is fixed in
accordance with movie settings.
You can configure the camera to save two images when shooting with HDR Art: one
image with HDR Art effects applied in accordance with the scene you selected plus
another normal (Program Auto) image without any effects applied.
1. Align the mode dial with [C] and then press [MENU].
2. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [6].
3. Use [8] and [2] to select “Double (HDR Art)” and then press [SET].
4. Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved
(normal image not saved).
5. Press the shutter button to shoot.
Saving a Second Normal Image When Shooting with HDR Art
(Double (HDR Art))
To Next Page
Loading...
Need help?
General
