90
Using BEST SHOT
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
• To return to the scene menu, rotate the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
. BEST SHOT Precautions
• Sample images shown on BEST SHOT scene screens were not shot with this
camera. There are provided to illustrate the effects and merits of each scene.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Snapshot shooting is disabled while the following BEST SHOT scenes are being
used.
Prerecord (Movie)
• Movie recording is disabled while the following BEST SHOT scenes are being
used.
Blurred Background, All-In-Focus Macro, HS Best Selection, HS Anti Shake, Wide
Shot, HS Night Shot, Slide Panorama, HDMI TV Output, Triple Shot, HDR, Multi
SR Zoom
• When the movie mode is FHD/STD, movies are recorded using the settings of the
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene
settings are ignored and movie recording is performed as it normally is.
• BEST SHOT scenes that use High Speed CS ignore the “Zoom (SR)” setting.
• With the BEST SHOT scenes below, certain shooting conditions can cause the
image area to become narrower than normal.
HS Night Scene and Portrait, HS Night Shot
To Next Page
Loading...
Need help?
General
