67
Snapshot Tutorial
8. Use [8] and [2] to select the continuous shutter (CS) speed you want
and then press [4].
• Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
9. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option and then press [SET].
10.
Use [8] and [2] to select the maximum number of shots and then
press [4].
11.
Use [8] and [2] to select the (Pre-record CS Shots) Control Panel
option and then press [SET].
12.
Use [8] and [2] to select the number of Prerecord (Still) images and
then press [SET].
• Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
• If you select “0 shots”, no pre-record images will be stored when you half-press
the shutter button.
13.
Half-press and hold the shutter button to start pre-recording.
A pre-record buffer is continually updated with images as long as the shutter
button is pressed.
• The camera will not emit shutter sounds as it pre-records images.
• Releasing the half-pressed shutter button will cause the contents of the pre-
record buffer to be deleted.
14.
Full press and hold down the shutter button.
This will record the images in the pre-record buffer followed by real-time recorded
images. Shooting of images will continue as long as you depress the shutter or
until the maximum number of images specified by “High Speed CS fps” is
reached.
To Next Page
Loading...
Need help?
General
