185
2. Display the coefficient menu.
4(VAR) or w
Function being graphed
Coefficient whose value will change
Coefficients in function
• {SEL} ... {selects dynamic coefficient}
• {RANG} ... {dynamic coefficient range settings}
• {SPEED} ... {dynamic Graph drawing speed}
• {AUTO} ... {automatic setting of end and pitch values to match coefficient
values}
• {DYNA} ... {dynamic Graph draw operation}
• The calculator automatically makes the first variable it finds the dynamic
coefficient. To select a different coefficient, use c and f to move the
highlighting to the coefficient you want to use, and the press 1 (SEL).
• The letters representing each coefficient are variables, and so the values that
appears on the screen are those currently assigned to each variable. If a
complex number is assigned to a variable, only the integer part appears.
•All variables contained in the currently selected function appear on the display
in alphabetical order.
• If there is more than one function that can be drawn using Dynamic Graph, the
message “Too Many Functions” appears on the display.
• If the value of the dynamic variable is zero and you press 5 (AUTO), the
dynamic variable automatically changes to 1 and Dynamic Graphing is
performed.
3. Specify the value of each coefficient.
cw-bw-bw
• If there is more than one coefficient, use f and c to move the highlighting
to each coefficient and input its value.
•Values you input for coefficients are also assigned to the corresponding
variable.
4. Recall the coefficient range menu.
2(RANG)
• The range you set remains in effect until you change it.
Drawing a Dynamic Graph 13 - 3
Dynamic coefficient
Start value
End value
Increment
To Next Page
Loading...
Need help?
General
