43
1-5 Program (PRGM) Menu
To display the program menu, first enter the RUN or PRGM Mode from the Main
Menu, and then press ! W.
!W
1 (COM) ...... Program command menu
2 (CTL) ........ Program control command
menu
3 (JUMP) ..... Jump command menu
4 (?) ............ Input command
5 (^) ........... Output command
6 (g) ........... Next menu
6 (g)
1 (CLR) ....... Clear command menu
2 (DISP) ...... Display command menu
3 (REL) ....... Conditional jump relational operator menu
4 (I/O) .......... Input/output control command menu
5 (:) ............. Multistatement connector
6 (g) ........... Previous menu
The following function key menu appears if you press ! W in the RUN Mode or
the PRGM Mode while binary, octal, decimal, or hexadecimal is set as the default
number system.
!W
The functions assigned to the function keys are the same as those in the Comp
Mode.
For details on the commands that are available in the various menus you can access
from the program menu, see “19. Programming”.
123456
123456
P.313
123456
To Next Page
Loading...
Need help?
General
