Casio XJ-UT331X User Manual

35
Option Settings 1 3
Auto Adjust (R)
Specify whether the projector should detect the RGB input signal type (resolution,
frequency) and adjust the projection image accordingly.
On*: Auto Adjust enabled.
Off: Auto Adjust disabled.
Note
 If you want to retain the following “Image Adjustment 2” menu settings
when power is turned off, select “Off” for this setting: “Vertical Position”,
“Horizontal Position”, “Frequency”, “Phase”.
Option Settings 1 3
Light Control 3
Light Output
See “Light Control” (page 27).
Option Settings 1 3
Light Control 3
Light Sensor
Enable or disable the light sensor.
On: Enables automatic adjustment of light output in accordance with surrounding
light.
Off*: Disables automatic adjustment of light output.
Option Settings 1 3
Light Control 3
Light Control
Enable or disable projector light output (light source brightness).
On*: Enables light output adjustment.
Off: Disables light output adjustment and “Light Sensor” (below). This setting must
be selected when you want the light source to output at maximum brightness.
Option Settings 1 3
Auto Power Off
Specify the amount of time of projector operation and input signal inactivity to be
allowed before Auto Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min: Time until Auto Power off is triggered.
Off: Disables Auto Power Off.
Option Settings 1 3
Password
See “Password Protection” (page 38).
Option Settings 1 3
Direct Power On
Enable (On) and disable (Off*) projector auto power on as soon as the projector’s AC
power cord is plugged into a power outlet.
Option Settings 1 3
Projector ID
See “Configuring Remote Control ID and Projector ID Settings” (page 30).
Option Settings 1 3
Language
Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Lithuanian, Vietnamese, Thai, Malay,
Indonesian, Arabic, Chinese (Simplified), Chinese (Traditional), Korean, Japanese
Important!
 Network Model Users
When using certain Network model functions, some menus and messages
may be displayed in English, regardless of the language selected here.
Option Settings 1 3
Restore Menu Defaults
Return all of the items in the “Option Settings 1” main menu to their initial defaults for
the currently projecting image source.
Option Settings 2 3
Plug and Play
Specify what the projector should do when a supported external USB device is
connected to the projector’s USB-A port or when the projector is turned on while an
external USB device is connected to the USB-A port.
On: Enables automatic input source switching.
Off*: Disables automatic input source switching.
Use this menu item: To do this:

Casio XJ-UT331X Specifications

General

Brand	Casio
Model	XJ-UT331X
Category	Projector
Language	English