Casio XJ-UT331X User Manual

37
Multimedia Settings 3
Autorun
Specify whether to use (Enable*) or not use (Disable) the autorun function. For
details, see “Autorun” (page 43).
Multimedia Settings 3
Functions (F)
Display the same menu (Function Menu) that appears when the remote controller’s
[FUNC] key is pressed.
Network Settings 3
Wired LAN info
Shows information about the current wired LAN connection status (IP address,
DHCP setting, etc.)
Network Settings 3
Wireless LAN Info
Shows information about the current wireless LAN connection (IP address, DHCP
setting, security settings, status of connection with external access point, etc.)
Network Settings 3
Projector Wired LAN
Settings
Configure the IP address setting.
Network Settings 3
Projector Wireless LAN
Settings
Displays a dialog box for selecting the SSID and setting the IP address for use when
the projector is used as a wireless LAN access point.
Network Settings 3
Remote On
Specify whether the projector can be turned on via wired LAN while the projector is
in standby (projector off with power being supplied).
Enable: Remote on enabled.
Disable*: Remote on disabled.
Projector standby power consumption depends on whether or not “Remote On” is
enabled. For information about power consumption in each standby state, see
“Specifications” (page 60).
Network Settings 3
PJLink Authentication
Enables and disables PJLink connection authentication. Initial default setting:
Enable.
Network Settings 3
Update Network Settings
Reflects on the projector changes made to “Projector Wireless LAN Settings”.
Network Settings 3
Initialize Network Settings
Returns network settings to their initial factory defaults.
Operational Info Display the projector information below.
Input Signal, Signal Name, Resolution, Horizontal Frequency, Vertical Frequency,
Scan System, Audio Input, Projector ID, Light Time, Version (projector ROM version)
Restore All Defaults 3
Unit Operating Time
Display the cumulative operating time of this unit.
This time cannot be initialized.
Restore All Defaults 3
Restore All Defaults
Initialize all Setup Menu item settings, except for those below.
Option Settings 1 3 Language, Option Settings 1 3 Power On Password,
Operational Info 3 Light Time, Operational Info 3 Version,
Restore All Defaults 3 Unit Operating Time
Note
 A user logo image that has been transferred to the projector (page 52) is not
deleted by a “Restore All Defaults” operation.
Use this menu item: To do this:

Casio XJ-UT331X Specifications

General

Brand	Casio
Model	XJ-UT331X
Category	Projector
Language	English