Shifting to Neutral
To shift the transfer case to neutral, first make sure the
vehicle is parked
so
that it will not roll:
1.
Set the parking brake.
2. Start the vehicle.
3.
Connect the vehicle
to
the towing vehicle.
4.
Put the transmission in NEUTRAL (N).
5.
Shift the transfer case to 2HI.
6.
Simultaneously press and hold the 2HI and
4LO
buttons for
10
seconds. The red NEUTRAL light
will come on when the transfer case shift to neutral
is complete.
7.
Shift the transmission to REVERSE (R) for
one second, then shift the transmission to
AUTOMATIC OVERDRIVE
@
for one second.
8.
Turn the ignition to
OFF.
9.
Place the transmission shift lever in PARK (P).
10.
Release the parking brake prior
to
towing.
Shifting Out
of
Neutral
To shift out of neutral:
1.
Set the parking brake and apply the regular
brake pedal.
2.
Start the vehicle with the transmission in PARK (P).
3.
Press the button for the desired transfer case shift
position (2HI,4HI, AUTO
4WD
or
4LO).
4. Put the transmission in NEUTRAL (N).
5.
Shift the transmission lever to the desired position.
After the transfer case has shifted out of NEUTRAL,
the red light will go out.
Parking
Brake
To set the parking brake, hold the regular brake pedal
down with your right foot. Push down the parking brake
pedal with your left foot.
If the ignition is on, the brake system warning light will
come on.
2-24
To Next Page
Loading...
Need help?
General
