1.
Move the cruise
control switch
to ON.
2.
Get up
to
the speed
you
want.
3.
Push in the SET
button at the end of
the lever and
release it.
4.
Take your foot off the accelerator pedal.
Resuming
a
Set
Speed
Suppose
you
set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don’t need to reset
it.
Once you’re going about
25
mph
(40
km/h)
or more,
you can move the cruise
control switch from
ON
to
R/A
(Resume/Accelerate)
for about half
a
second.
You’ll go right back up to your chosen speed and
stay there.
Remember, if you hold the switch at R/A longer than
half
a
second, the vehicle will keep going faster until
you release the switch or apply the brake.
So
unless you
want to go faster, don’t hold the switch at
R/A.
2-38