Chevrolet SUBURBAN 1998 User Manual

Front Parkinflrn Signal Lamps with
Sealed Beam Headlamps
1. Remove the two screws
at the inside edge of the
parking/turn signal
lamp assembly.
2. Remove the lamp assembly by swinging it out from
the inside edge and sliding it out at the outside edge.
4.
5.
6.
7.
8.
Pull the socket out of the lamp assembly.
Push in gently on the bulb, turn
it to the left and
remove it from the socket.
Put the new bulb into the socket, gently press in on
the bulb and turn it to the right until
it is tight.
Put the socket back into the lamp assembly and turn
it to the right until
it locks.
Put the parkingkurn signal lamp assembly back into
the vehicle and tighten the screws.
6-39

Chevrolet SUBURBAN 1998 Specifications

General

Brand	Chevrolet
Model	SUBURBAN 1998
Category	Automobile
Language	English