The mirror can be calibrated in one of two ways:
Drive the vehicle in circles at five mph
(8
km/h)
or
less until the display reads a direction,
or
Drive the vehicle on your everyday routine.
Compass
Variance
The mirror is set in zone eight upon leaving the factory.
It will be necessary to adjust the compass to compensate
for compass variance if you live outside zone eight.
Under certain circumstances, as during a long distance
cross-country trip, it will be necessary to adjust for
compass variance. Compass variance is the difference
between earth’s magnetic north and true geographic
north. If not adjusted to account for compass variance,
your compass could give false readings.
To adjust for compass variance:
1.
Use the COMP button located at the bottom
of
the mirror.
2.
Press and hold the
COMP
button for three seconds
until a zone number appears in the display.
3.
Find your current location and variance zone number
on the following zone map.
I
4.
Press the COMP button on the bottom of the mirror
until the new zone number appears in the display.
After you stop pressing the button in, the display will
show a compass direction within a
few
seconds.
2-46
To Next Page
Loading...
Need help?
General
