Front Parkin-rn Signal
Lamps
with
Composite
Headlamps
I.
1.
Remove the
four
screws
and take out the
parkingltum signal
lamp assembly.
2.
Squeeze the tab on the side
of
the lamp socket while
turning the socket to the left.
3.
Pull the socket out of the
lamp assembly.
4.
Push in gently
on
the bulb, turn it to the left and
remove
it
from the socket.
5.
Put the new bulb into the socket, gently press in on
the bulb and turn it
to
the right until it is tight.
6.
Put the socket back into the lamp assembly and
turn
it to the right until it locks.
7.
Put
the parkinglturn signal lamp assembly back into
the vehicle and tighten the four screws.
6-40
To Next Page
Loading...
Need help?
General
