Rear Heater (Without Rear Air Conditioning)
(If
Equipped)
If you have a rear heater
(without rear air
conditioning), the control
switch is located on the
instrument panel.
Rear Air Conditioning and Rear Heater
(If
Equipped)
If
your vehicle
has
the rear air conditioning and rear
heater system combination, controls are provided to
regulate speed of the airflow, location and temperature.
To increase and decrease the flow
of
heated air to the
rear floor vents, move the switch marked REAR
HEAT
to the blower speed you want.
To
adjust the airflow speed, turn the fan control knob
The knob has three speed positions. To increase the flow on the
left
side of the control panel to the desired
of heated air, move the switch toward
HIGH.
To
decrease the flow of heated air, move it toward
LOW.
TO
To
activate the rear control, move the fan knob on the
turn the fan off, move
the
switch to
OFF.
front control to REAR
CNTL.
blower setting.
To regulate the airflow location, adjust the center knob
on the control panel. Turn the knob
to
the right for floor
vent airflow
or
to the left for headliner vent airflow.
3-5
To Next Page
Loading...
Need help?
General
