Radiator Pressure Cap
m--
The radiator pressure cap must be tightly installed with
the arrows on the cap lined up with the overflow tube on
the radiator filler neck.
NOTICE:
Your radiator cap is a
15
psi
(105
kPa)
pressure-type cap and must be tightly installed to
prevent coolant
loss
and possible engine damage
from overheating. Be sure the arrows on the cap
line up with the overflow tube on the radiator
filler neck.
Thermostat
Engine coolant temperature is controlled by a thermostat
in the engine coolant system. The thermostat stops the
flow
of
coolant through the radiator until the coolant
reaches a preset temperature.
When you replace your thermostat, an
AC@
thermostat
is recommended.
6-29
To Next Page
Loading...
Need help?
General
