Cargo
Tie
Downs
To
put the shade in the vehicle, first make sure the shade
slot in the holder faces rearward with the round surface
facing down. Then, hold the shade
at
an angle and place
the shade holder tab into the slot in the passenger’s side
trim panel. Move the other end
of
the shade forward and
hold it next to the driver’s side trim panel slot.
Push the shade holder toward the passenger’s side
of
the
vehicle and place the tab in the driver’s side trim panel
slot. Make sure the tab goes all the way in the slot.
Lightly pull on the shade holder to make sure it
is
secure.
Then, pull the shade
to
the desired position and secure
the
shade posts
in
the appropriate retaining sockets.
There are cargo tie
downs in the rear
cargo area that allow
you
to strap cargo in
and keep
it
from
moving inside
When not using the tie downs, flip them down out
of
the way.
To Next Page
Loading...
Need help?
General
