EasyManuals Logo
Home>Cisco>Wireless Router>3750G - Catalyst Integrated Wireless LAN Controller

Cisco 3750G - Catalyst Integrated Wireless LAN Controller User Manual

Cisco 3750G - Catalyst Integrated Wireless LAN Controller
1204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #713 background imageLoading...
Page #713 background image
CHAPTER
33-1
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
33
Configuring QoS
This chapter describes how to configure quality of service (QoS) by using automatic QoS (auto-QoS)
commands or by using standard QoS commands on the Catalyst 3750 switch. With QoS, you can provide
preferential treatment to certain types of traffic at the expense of others. Without QoS, the switch offers
best-effort service to each packet, regardless of the packet contents or size. It sends the packets without
any assurance of reliability, delay bounds, or throughput. Unless otherwise noted, the term switch refers
to a standalone switch and a switch stack.
In software releases earlier than Cisco IOS Release 12.2(25)SE, you can configure QoS only on physical
ports. In Cisco IOS Release 12.2(25)SE or later, you can configure QoS on physical ports and on switch
virtual interfaces (SVIs). Other than to apply policy maps, you configure the QoS settings, such as
classification, queueing, and scheduling, the same way on physical ports and SVIs. When configuring
QoS on a physical port, you apply a nonhierarchical policy map. When configuring QoS on an SVI, you
apply a nonhierarchical or a hierarchical policy map. In the Catalyst 3750 Metro switch documentation,
nonhierarchical policy maps are referred to as nonhierarchical single-level policy maps, and hierarchical
policy maps are referred to as hierarchical dual-level policy maps.
Note For complete syntax and usage information for the commands used in this chapter, see the command
reference for this release.
This chapter consists of these sections:
Understanding QoS, page 33-2
Configuring Auto-QoS, page 33-20
Displaying Auto-QoS Information, page 33-30
Configuring Standard QoS, page 33-30
Displaying Standard QoS Information, page 33-79
The switch supports some of the modular QoS CLI (MQC) commands. For more information about the
MQC commands, see the “Modular Quality of Service Command-Line Interface Overview” at this site:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt8/
qcfmdcli.htm#89799

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3750G - Catalyst Integrated Wireless LAN Controller and is the answer not in the manual?

Cisco 3750G - Catalyst Integrated Wireless LAN Controller Specifications

General IconGeneral
BrandCisco
Model3750G - Catalyst Integrated Wireless LAN Controller
CategoryWireless Router
LanguageEnglish

Related product manuals