Cisco 6841 User Manual

• Call filter type—Choose one of the following options:
This menu item is available when the Call filter mode is set to Simple.
Note
• All Calls—All your incoming calls go to your assistants.
• Internal Calls—If you and the callers are in the same BroadSoft group, their incoming
calls go to your assistants.
• External Calls—If you and the callers are not in the same BroadSoft group, their incoming
calls go to your assistants.
d. Press Set to apply the changes.
• If your administrator only enables the feature key synchronization (FKS) on your extension:
a. Press the On softkey to activate call filtering.
b. Press to exit.
Deactivate Call Filtering as an Executive
When call filtering is off, none of your incoming calls go to your assistants.
Dial the service activation code provided by your administrator, or follow the procedure described below to
deactivate call filtering.
Before you begin
Your administrator gives you executive user privileges.
Procedure
Step 1 Do one of the following actions:
• If your administrator has programmed the Executive function on a line key, the phone shows the
Executive together with the call filtering status (On or Off) on the main screen. Press the line key.
• If you do not have the Executive function that is configured on a line key:
a. Press Applications .
b. Select Executive .
Step 2 Follow the below procedure according to the actual menus displayed on the phone.
• If your administrator configures your extension to connect to the XSI BroadWorks server:
a. Select Call filter > Call filter
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
153
Settings
Deactivate Call Filtering as an Executive

Cisco 6841 Specifications

General

Brand	Cisco
Model	6841
Category	IP Phone
Language	English