DescriptionFeatures
You assign phone numbers to speed-dial numbers so that you can quickly call that
person.
Speed dial
You assign a ringtone to a specific line.Ringtone
You add a contact to your personal directory with phone web page.Personal directory
contact
You set up an HTTP proxy for the phone to connect to the internet.HTTP proxy
You set up the phone to connect to the network through a VPN sever.VPN connection
Related Topics
Forward Calls with the Phone Web Page, on page 48
Speed Dial, on page 37
Assign a Ring Tone with the Phone Web Page, on page 94
Add a New Contact to Your Personal Address Book with Phone Web Page, on page 60
Speed-Dial Numbers
When you dial a number on your phone, you enter a series of digits. When you set up a speed-dial number,
the speed-dial number must contain all the digits you need to make the call. For example, if you need to dial
9 to get an outside line, you enter the number 9 and then the number you want to dial.
You can also add other dialed digits to the number. Examples of additional digits include a meeting access
code, an extension, a voicemail password, an authorization code, and a billing code.
The dial string can contain the following characters:
• 0 to 9
• Pound (#)
• Asterisk (*)
• Comma (,)—This is the pause character, and gives a 2 second delay in the dialing. You can have several
commas in a row. For example, two commas (,,) represent a pause of 4 seconds.
The rules for dial strings are:
• Use the comma to separate the parts of the dial string.
• An authorization code must always precede a billing code in the speed-dial string.
• A single comma is required between the authorization code and the billing code in the string.
• A speed-dial label is required for speed dials with authorization codes and additional digits.
Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence
is correct.
Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the phone prompts you to enter any
required authorization code, billing code, or additional digits manually.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
20
Your Phone
Speed-Dial Numbers
To Next Page
Loading...
Need help?
General
