Cisco 7961G Administration Guide

Chapter 4 Configuring Settings on the Cisco IP Phone
Configuration Menus on the Cisco IP Phone
4-4
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
To unlock or lock options, press **#. This action either locks or unlocks the
options, depending on the previous state.
Make sure to lock options after you have made your changes.
Caution Do not press **# to unlock options and then immediately press **# again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press **# again.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Editing Values, page 4-4
• Overview of Options Configurable from a Phone, page 4-5
• Network Configuration Menu, page 4-6
• Device Configuration Menu, page 4-15
Editing Values
When you edit the value of an option setting, follow these guidelines:
• Use the keys on the keypad to enter numbers and letters.
• To enter letters using the keypad, use a corresponding number key. Press the
key one or more times to display a particular letter. For example, press the 2
key once for “a,” twice quickly for “b,” and three times quickly for “c.” After
you pause, the cursor automatically advances to allow you to enter the next
letter.
• To enter a period (for example, in an IP address), press the . (period) softkey
or press * on the keypad.
• Press the << softkey if you make a mistake. This softkey deletes the character
to the left of the cursor.
• Press the Cancel softkey before pressing the Save softkey to discard any
changes that you have made.

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English