Cisco IE 3010 User Manual

16
Product Overview
Management Options
Power Supply Features
The switch has two slots for power-supply modules:
 PWR-RGD-LOW-DC/IA: low-voltage DC (for voltage information, see Table 18 on page 69)
 PWR-RGD-AC-DC/IA: high-voltage AC or DC (for voltage information, see Table 17 on page 69)
The switch supports these power-supply module combinations:
 Single low-voltage DC
 Single high-voltage AC or DC
 Two high-voltage AC or DC
 Two low-voltage DC
 One high-voltage AC or DC and one low-voltage DC
For information on installing the power-supply modules, see Power Supply Installation, page 47
See Table 4 on page 12 for information on the power supply LEDs.
Management Options
 Cisco IOS CLI
You can configure and monitor the switch from the CLI. Connect your management station to the switch console port
or use Telnet from a remote management station. See the switch command reference on Cisco.com for information.
 SNMP network management
You can manage switches from a Simple Network Management Protocol (SNMP)-compatible management station
that is running platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive set of
Management Information Base (MIB) extensions and four Remote Monitoring (RMON) groups. See the switch
software configuration guide on Cisco.com and the documentation that came with your SNMP application for
information.
Network Configurations
See the switch software configuration guide on Cisco.com for an explanation of network configuration concepts. The
software configuration guide also provides network configuration examples for creating dedicated network segments
that are interconnected through Ethernet connections.
1. Only on the Cisco IE-3010-16S-8PC switch.
For a description of the LEDs, see the LEDs, page 11.

Cisco IE 3010 Specifications

General

Brand	Cisco
Model	IE 3010
Category	Switch
Language	English