Cisco IE 3010 User Manual

6
Product Overview
Cable Side
Figure 1 Cisco IE-3010-24TC Cable-Side View
The100BASE-FX SFP ports and the 10/100 PoE ports are grouped in pairs. The first member of the pair (port 1) is above
the second member (port 2) on the left. Port 3 is above port 4, and so on. The dual-purpose ports are numbered 1 and 2.
Figure 2 Cisco IE-3010-16S-8PC Cable-Side View
10/100 Fast Ethernet Ports
You can set the 10/100 ports on the switch to operate in any combination of half duplex, full duplex, or 10 or 100 Mb/s.
You can set the ports for speed and duplex autonegotiation. The default setting is autonegotiate.
1 SD
1
flash memory card slot
1. SD = Secure Digital
6 RJ-45 console port
2 LEDs 7 USB (mini-Type B) console port
3 Express Setup button 8 Power-input terminal
4 10/100 ports 9 Alarm port
5 Dual purpose ports
1 SD flash memory card slot 6 Dual purpose ports
2 LEDs 7 RJ-45 console port
3 Express Setup button 8 USB (mini-Type B) console port
4 100BASE-FX SFP ports 9 Power-input terminal
5 10/100 PoE ports 10 Alarm port
7
4 92
1 3 5 6 8
208362
Cisco IE 3010
PO W ER
OVER
ETH ERN ET
PO W ER
OVER
ETH ERN ET
8
4
102
1 3 65 7 9
208363
Cisco IE 3010

Cisco IE 3010 Specifications

General

Brand	Cisco
Model	IE 3010
Category	Switch
Language	English