Administration
File Management
Cisco Small Business SG200 Series 8-port Smart Switch 58
3
WARNING Ensure that power to the switch remains uninterrupted while downloading an image
or a boot code file to the switch. If a power failure occurs while downloading a file,
the file contents in persistent memory are lost.
If a power outage occurs during boot code file download, the switch will not be
able to boot. Contact the Cisco Small Business Support Center for assistance.
If a power outage occurs during image download, the image will not load, but the
boot loader will continue to be operational. See Firmware Recovery Over HTTP
for instructions on downloading a working image.
Downloading and Backing Up the Configuration and Log Files
You can use the Download/Backup Configuration/Log page to download a saved
configuration file to the switch to restore previously saved settings, or back up the
current configuration file to a network location. You also can use this page to back
up log files.
• Downloading a Configuration File to Restore Settings
• Backing Up the Configuration File and Logs
Downloading a Configuration File to Restore Settings
To download a configuration file to the switch to restore a previously backed-up
file:
STEP 1 Click Administration > File Management > Download/Backup Configuration/
Log in the navigation window.
STEP 2 Select the Transfer Method (HTTP or TFTP).
STEP 3 For the Save Action, select Upgrade to download the file that will be specified
below.
To Next Page
Loading...
Need help?
General
